Newborn - 4-5years = 5"| 12.7cm

5-6years - L adult = 8"| 20.32cm

XL adult - 3XL = 10"| 25.4cm

We offer our designs in a variety of sizes

Our general rule of thumb when picking the right size for DTF:

Pocket size to go over breast - 3" wide, if the garment is 3XL or larger, 4" wide may be suggested.

Newborn - 5-6 years - 5" wide transfer

6-7 kids upto L/XL - 8" wide transfer

XL/2XL - 4XL - 10" wide transfer.

Want this design in a different size or to add it onto a gang sheet to save money? Search this design name in the Media gallery whilst in the gang sheet builder to add it to your custom DTF/ UV-DTF sheets!

DTF Hot Peel Transfer Instructions: 

COTTON (HOT PEEL)

160-180 degrees celsius for 20 seconds with heavy pressure and peel hot.

Lay Teflon sheet over design and 2nd press 8 seconds

 POLY (HOT PEEL)

130-140 degrees celsius for 20 seconds with heavy pressure and peel hot.

Lay Teflon sheet over design and 2nd press 8 seconds

Cricut, Cricut Mini and household iron (COLD PEEL)

160 degrees celsius for 20 seconds with heavy pressure and let cool completely before peeling.

Lay Teflon sheet over design and 2nd press 8 seconds.

These instructions are a guide as some heat presses give different results. Test transfers are provided for you with your first order, or order an additional Test transfer pack with your order first to find the best settings for your press.

Top Tip for transfers:

When peeling your first tester transfer, make sure your temp is 150-160 and ensure your pressure is set to heavy. It should take 2 hands to shut your press! Leave for 10-15 seconds and try peeling from one corner SLOWLY. If you notice some of the transfer is still on the transfer, put it back down and press again for another 5-7 seconds. Then try again. If it hasn't stuck down or is peeling away, put it back down and adust your pressure to a tighter pressure, and press again for 5-7 seconds. Then try again and repeat this process to find the perfect setting.  Once it's worked, then get your second transfer and try again for 10-15 seconds at that pressure and adjust based on your heat press settings. 

Keep DTF in a cool dry space to ensure transfers aren't damaged before use.

Your customers can be advised to wash the garment inside out on a Cool wash and to avoid tumble drying. When Ironing, they can iron inside out over the design, but not directly onto the design!